20 - 24 April
The transponder-antenna is used in identification systems with positioning. When a transponder enters reception range 2 the antenna outputs the transponder's code. When the transponder crosses the antenna center the positioning pulse is generated. This allows the detection of fixed positions.Overview- Transponder-Antenna for the positioning of automated guided vehicles (AGV)- Indoor, IP 65- Reading distance 50 mm- max. crossing speed (depending on variant and the functionality in use) 1.0 to 2.0 m/s- Voltage supply (depending on the variant) 22 - 28 VDC or 18 - 36 VDC, current consumption typically 130 mA @ 24 VDC- Operating frequency (depending on the variant): 409 kHz or 125 kHz- Posipulse when crossing the center axis in direction of travel, 24 V 20 mA current source- Connectors (depending on the variant): Up to 3x M12- Data interface (depending on the variant): RS 232 (serial), Profibus, CANopen®, Profinet (with integrated switch)- Service interface for configuration and firmware update (depending on the variant): serial RS 232 or USB with USB virtual serial port driver- Display operational state (depending on the variant): Up to 5 LEDs- Transponder programmingAs soon as a transponder is within the reading area the antenna wirelessly supplies it with inductive energy. The transponder uses that energy to cyclically transmit its code at half the antenna's operating frequency. Otherwise the transponder is passive and doesn't need any power supply or battery. Possible Applications in Automation Systems, e.g.- Storage- Material Handling- Identification of Containers- Positioning of trackguided Vehicles- Assembly Lines
The antenna is used for the localization and track guidance of automated guided vehicles (AGV) or cranes. All settings, calibrations and software updates necessary ...
During the operation of automated guided vehicles (AGV) there often is a demand to let the vehicle play notification sounds at specified positions throughout the ...
The Götting magnet sensor HG G-19600ZA detects the magnetic field above a magnetic tape in horizontal and vertical direction and continuously calculates the actual ...
For track guiding of automated vehicles, inductive
guidance systems have proven to be very reliable.
A frequency generator feeds a current into a guide
wire installed ...
KATE is a small AGV for automatically carrying loads up to approx. 50 kg, e.g. small carrier loads (400 x 600 mm).
The system is based on the Götting Control Unit HG G-61430YD.
The system uses RTK DGNSS to calculate highly accurate positions (GNSS = Global Navigation Satellite ...
Der Auswerter HG 73840ZA ist Bestandteil eines optischen Spurführungssystems zur Führung von Fahrerlosen Transport-Fahrzeugen (FTF) entlang einer Linie. Er wertet ...
The department FOX develops complete vehicle systems, covering driver assistance as well as entire autonomous transportation systems, including even the vehicles. ...
The product portfolio is completed by advanced radio data modems which are used for communication between AGVs (peer-to-peer) or between AGV and a higher-level master ...
Currently the most important sensors for trackguiding Automated Guided Vehicles (AGV) work with artificial landmarks. These sensors are guide wires and / or transponders ...