The NRH300DP is a no-contact, Rotary Position Sensor that offers the optimal combination of performance, safety and cost.
The NRH300DP utilises proven Hall-effect, sensing technology in a low-profile 8mm housing with separate magnet for true no-contact sensing.
The electrical output span can be set to correspond to rotations of 20 degrees to 360 degrees, and the positional information is determined by the angle of the supplied magnet relative to the sensor body. The maximum air gap between magnet and sensor is 5.5mm, while concentric offsets of up to 2mm can be tolerated with minimal impact on output linearity. The magnet can be supplied in a convenient carrier, housed in a bolt, as a plug or loose.
Innovative circuit design allows the sensor to be powered from a regulated 5V supply or a varying voltage in the range of 9-30V, such as a vehicles battery.
The NRH300DP contains on-board diagnostic functions that mean the outputs can be put into safe, pre-defined states should an internal sensor error be detected.
To enhance system performance, the NRH300DP has a second, redundant output that can be used for error checking in safety-critical applications. The versatile, factory-programmable electronics can be easily set to one of two analog voltage output ranges or one of three PWM frequencies. In addition, the polarities of each of the analog outputs can be independently set. On-board diagnostic functions ensure the outputs are put into safe, pre-defined states should an internal sensor error be detected.
The sealed design offers exceptional levels of performance with respect to water and dust, shock, vibration and temperature, meaning the sensor is ideal for use in hostile, on- and off-highway vehicle environments.
Connection to the sensor is with simple flying leads for customer termination.